Why we publish tip dimensions — and most brands don’t
A dimension table removes the only reason to call a sales line. That is exactly why it is worth publishing.
One plant · four processes
Soldering tips, made by the manufacturer.
XANJO turns, grinds, iron-plates and inspects every tip in our own plant in Dongguan. Nothing is bought in finished and re-labelled. 400+ geometries across 12 platforms, with a drawing for the exact part number issued before you order.
- Geometries in production
- 400+
- Shank tolerance
- ±0.05 mm
- Sample lead time
- 5 days
Fig. 01 — 900M / T18 familyRoHS 3
Quality systemDocumented QMS
MaterialsRoHS 3 · REACH on request
Every batchInspection report
Minimum order20 pcs per geometry
Tooled for the platforms you already run
- 900M
- T18
- T12
- 200
- 911G
- 910
- UNIX
- Apollo
- DVAP
- WSP80
- WP80
- LHT
01 Product families
Find your platform first.
Tips are grouped by the machine they fit, not by our internal part numbers. Pick the family, then the geometry.
01
02
03
04
05
06
Hand soldering tips
900M · T18 · T12 · 200 series
180 geometries →High-frequency tips
911G · 910 · HSV
96 geometries →Robotic & cartridge
UNIX · Apollo · DVAP
74 geometries →Hot-bar thermodes
V · U · T · DK · grooved
42 geometries →Wave solder nozzles
Selective · point · slot
38 geometries →Weller-compatible
WSP80 · WP80 · LHT
46 geometries →Need a shape that does not exist yet? Custom geometries to drawing, 5 working days.
02 Stock geometries
Ordered most often this quarter.
UNIX-24 In stock
Cartridge 2.4 mm
- Fits
- UNIX auto machines
- Length
- 101 mm
- MOQ
- 20 pcs
03 Why direct
A tip factory, not a trading desk.
Six questions buyers ask before switching supplier — and the answer from each side of the table.
| Question | Trading company | XANJO |
|---|---|---|
| Where does the tip come from? | Bought finished, re-labelled, shipped | Turned and ground on our own CNC line |
| Can I see the dimensions? | Shared after the order is placed | Published for all 400+ geometries |
| How is the iron layer controlled? | Not disclosed | By plating thickness, not by time |
| How fast is a sample? | Two to three weeks, from a third party | Five working days, from our line |
| What ships with the batch? | A commercial invoice | Inspection report and material declarations |
| Who answers technical questions? | A sales desk | The people who set the machine |
04 Applications
Where these tips end up.
Different joints need different heat delivery. These are the six jobs our customers bring us most often.
Hand soldering & rework
Chisel for through-hole, conical for single pins, knife for drag work on fine pitch.
Wire harness assembly
Large thermal mass, short cycle. Bevel and wide chisel geometries hold temperature through the joint.
Power battery & BMS
Busbars and nickel tabs need stored heat. Slotted thermodes and wide blades are the usual answer.
FPC & fine pitch
0.3 mm pitch connectors. Bent conical tips reach the pad without touching the housing.
Enamel wire & micro coils
Hot-bar thermodes strip and bond enamel wire in one step, without pre-tinning.
Sensors & connectors
Delicate leads, tight clearance. Low-mass tips with fast recovery keep the joint under 3 s.
05 The company
A tip maker, not a tip trader.
XANJO Precision Technology Co., Ltd. runs a soldering-tip factory in Dongguan, south China. We turn, grind, plate and inspect on the same site — barrel, iron core, nickel layer, final geometry check.
That is why we can publish dimensions. When a customer asks whether a 1.2 mm chisel will clear a 0.8 mm pad, nobody has to check with a supplier. We walk to the grinder.
- Geometries in production
- 400+
- Platforms covered
- 12
- Processes in-house
- 4
- Minimum order
- 20 pcs
06 Inside the plant
Where the tips are made.
Turning, plating, assembly and inspection — photographed on the floor, not staged in a studio.
- 4processes under one roof
- 12platforms tooled
- 400+geometries in production
- 48 hdispatch on stocked items
07 Quality & compliance
Paperwork that ships with the goods.
EU buyers do not just need a tip that fits. They need a file that survives an audit. Every order leaves Dongguan with the documents below, and the certificate set travels with the first shipment.
Quality and compliance detail →-
System
Documented QMS
A documented quality management system governs production. Certificate available on request.
-
Substances
RoHS 3 — EU 2015/863
A declaration covering the ten restricted substances can be issued with a shipment.
-
Chemicals
REACH SVHC
Screening against the current candidate list can be stated on the packing list on request.
-
Traceability
Inspection report
Shank diameter, length and tip profile measured against the drawing, packed with the goods.
08 News & notes
Written by the people on the floor.
09 Questions
Before you send an enquiry.
The five questions that come up in almost every first email. If yours is not here, ask it directly — the reply comes from the production team, not a call centre.
Ask a technical question →Do you manufacture the tips yourselves or resell them?
We manufacture. Copper and iron bar stock is turned, the profile is ground on CNC centres, the iron and nickel layers are plated on our own line, and each batch is dimension-checked and solder-tested before packing — all on one site in Dongguan.
What is the minimum order quantity?
20 pieces per geometry for stocked items. Mixed geometries can be combined to reach the minimum, so a trial order can cover several shapes at once.
How quickly can I get samples?
Stocked geometries are dispatched as samples in 5 working days. A geometry cut to your drawing takes 7 to 10 working days, because a new grinding profile has to be set up first.
Can you match a drawing or an OEM part number?
Yes. Send the drawing, the OEM number, or a photograph of the tip next to a rule. We confirm shank diameter, length and tip geometry in writing before production, and hold ±0.05 mm on the shank.
Which documents ship with an EU order?
RoHS and REACH declarations can be issued with a shipment on request, together with a dimensional inspection report. Quality certificates and material declarations are available on request.
10 Contact
Tell us the iron. We’ll name the tip.
Send the model number, or a photo of the iron socket next to a rule. We identify the geometry and reply within one working day.
- 01Send the model or a drawing
Photo, OEM number or a sketch with three dimensions is enough to start.
- 02We confirm the geometry
A written spec and a quote, usually the next working day.
- 03Sample, approve, produce
Samples in 5 days, then production and dispatch with the batch file.
- Email info@xanjotips.com
- Phone +86 131 6899 4132
-
Factory
Room 809, Building B1-1, Guangda We Valley,
No. 4, Headquarters 2nd Road,
Songshan Lake Park, Dongguan,
Guangdong, China - Hours Mon–Fri, 08:30–18:00 GMT+8